THERMAL HYDRODYNAMIC H-SG SERIES PUMPS

PURPOSE

H-SG heat generator pumps are designed to heat water in the liquid phase.
The H-SG heat generator pump is used: for autonomous heating systems, for hot water supply systems, in autonomous ventilation and air heating systems.
Scope of application: residential buildings, public buildings, industrial premises, agricultural complexes and technological processes.

The H-SG heat generator pump is a set of units designed to organize counter-transverse flows of the processed material in the liquid phase in a confined space.
The principle of operation of H-SG is to organize hydrodynamic oscillations in the heat generator block, providing conditions for the rupture or transformation of intermolecular bonds in a liquid medium with the subsequent release of heat (heating of the liquid) due to a temperature surge at the sites of rupture or transformation of intermolecular bonds.
Heat generator pump type H-SG - disc, horizontal, with direct drive from an electric motor through an elastic coupling.
The generator and electric motor are installed on a common frame.
The type of main electric motors and components of the H-SG depend on the power of the H-SG . The shaft rotates based on bearings.
Bearing installation is fixed, grease lubrication. H-SG pumps are unified and differ only in body parts.
The H-SG is equipped with mechanical seals.
H-SG type pumps comply with specifications and are certified.
They do not require approvals for installation, because energy is used to rotate the electric motor, and not to heat the coolant.
Operation of H-SG with electrical power up to 100 kW is carried out without a license.
They are fully prepared for connection to a new or existing heating system, and the design and dimensions of the installation simplify its placement and installation.
The required network voltage is 380 V.

Simplicity of design and assembly, small dimensions and weight allow you to quickly install a hydrodynamic thermal pump mounted on one platform anywhere, as well as connect it directly to an existing heating circuit.
No additional chemical water treatment is required; GOST R 51232-98 water is used.
The use of an automatic control system does not require the constant presence of maintenance personnel.
No heat losses in heating mains when installing thermal hydrodynamic pumps directly at the heat consumer.
The operation is not accompanied by emissions of combustion products or other harmful substances into the atmosphere, which allows its use in areas with limited maximum permissible limits.
The payback period for the implementation of thermal hydrodynamic pumps ranges from six to eighteen months.
If there is insufficient transformer power, it is possible to install an electric motor with a supply voltage of 3,000 volts - 6,000 volts (only for 200 and 250 kW). Manufacturing time is at least one hundred days.
In a dual tariff system, when heating with thermal hydrodynamic pumps at night, a small amount of water is sufficient, accumulating it in a storage tank and distributing it with a low-power circulation pump during the day. This allows you to reduce heating costs from 40 to 60%.