The hydrodynamic continuous circulation treatment method is offered for decontamination of heavily contaminated, artesian and river water, providing faster and less expensive water treatment.
The hydrodynamic method is intended for decontamination of treated liquids, quick aggregation of deposited water suspensions and water desalting by modifying its pH level throughout a wide range. The developed equipment provides a significant increase of speed and level of treatment of communal waste water and contaminated water.
Using this plant for preparation of drinking water from heavily contaminated water at the initial treatment stage allows excluding the use of chemical reagents and increasing the productivity of existing water treatment systems. Operation of the plant in flow mode is characterized by low level of energy consumption, and does not require intermediate reservoirs and contact devices.
The hydrodynamic plant МТC-1M is used for decontamination and purification in flow mode of contaminated natural and technical water.
The МТC-1M plant represents a small-size module and can be easily integrated into virtually any water preparation and treatment system.
Depending on the degree of contamination and solid residue content the average daily production capacity of one plant is 500÷1400 m3.
For the purpose of excluding the process of long-term water precipitation and purification from suspended mechanical admixtures of more than 1 micrometer the water is infiltrated through fluoroplastic fine purification filters. The scope of delivery includes two sets of filters providing continuous process of water treatment. The plant is equipped with the system of regeneration (purification) of the filtering elements.
Ova and larvae of parasites | 100,0 |
Bacteria | 99,99 |
Viruses | 99,96 |
For comparison, waste water treatment with liquid chlorine provides the level of disinfection of 91%, ozone treatment ‑ 96,4%, ultraviolet treatment ‑ 43,7%.
Parameters of bacterial contamination of waste waters after treatment using MTK plant comply with the Sanitary Regulations and Norms of surface water protection from contamination SanPiN 4630-88П, as well as the requirements of DSTU 3959-2000.
Decontamination in flow mode is performed by means of intensive hydrodynamic oscillations, resulting in the local temperature in liquid micro volumes during the phase transitions reaching up to 2000оС, and the pressure equaling hundreds of atmospheres. Besides, in the moments of creation and collapse of micro-cavities powerful impulse electric and magnetic fields are generated. As a result of these processes the treated liquid is repeatedly exposed to combined thermobaric and electromagnetic effect, resulting in
Non-chemical water treatment method ensures deep purification of water, retaining biological microelements vital to human organism: calcium, magnesium, potassium, fluorine, etc.
The hydrodynamic technology does not require construction of cumbersome floatators and extensive sedimentation basins, requiring allocation of significant land resources and huge capital investments for both construction and operation. The present technology allows reducing loads on existing water treatment systems, providing water treatment directly before the water withdrawal point, or, in case of significant wear of communal pipelines – directly at the consumer’s location.
According to the estimates, the use of hydrodynamic water decontamination and subsequent water treatment method provides 2-3 times reduction of economic expenditures.
Nominal power , kW | not exceeding 45 |
Production capacity, m3/h | 1-60 |
Dimensions, mm | 1700 х 1700 х 2000 |
Weight of the plant, kg | 350 |
Weight of complete module, kg | 1100 |
Operational mode | continuous |
Specific electric energy consumption, kW·h/m3 | 1,0÷1,4 |
Mains voltage | 380V, 50 Hz |
Level of decontamination | minimum 104 |
The plant does not require foundation for installation. Connection to storage reservoirs is made by flexible hoses.
The plant complies with the requirements of TU U 29.5-24670716-001:2005 and GOST 26582 for treatment of liquid phase materials in climatic version UKhL of deployment category 1 according to GOST 15150.
Copyright ©2023 All rights reserved